85
Keysight Handheld Analyzers
N99xxA User’s Guide
6 NA (Network Analyzer) Mode
Learn more about NA Mode measurements in the FieldFox Supplemental
Online Help:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm.
In this Chapter
“About S-parameters” on page 87
“Mixed-Mode S-Parameters” on page 88
“Parameter Conversion” on page 89
“Receiver Measurements” on page 90
“Multi-Trace Configurations” on page 91
“Quick Settings” on page 92
“Calibration Settings” on page 93
“Format” on page 94
“Frequency Range” on page 95
“Scale Settings” on page 95
“Magnitude Offset” on page 96
“Electrical Delay” on page 97
“Phase Offset” on page 97
“Averaging” on page 98
“IF Bandwidth” on page 99
“Smoothing” on page 99
“Single or Continuous Measure” on page 100
“Resolution (Number of Data Points)” on page 100
“Sweep Time” on page 101
“Output Power” on page 103
“System Impedance (Z0)” on page 104
To Next Page
Loading...
Need help?
General
