708 Keysight N9927-90001 User’s Guide
Safety Considerations
FieldFox Markings
FieldFox Markings
The CSA mark is a registered trademark of CSA International.
The C-Tick Mark is a registered trademark of the Australian Spectrum
Management Agency.
The RCM Mark is a registered trademark of the Australian Communications and
Media Authority.
This symbol combines the following three markings:
CE indicates product compliance with all relevant European legal Directives (if
accompanied by a year, it signifies when the design was proven).
ICES indicates product compliance with the Canadian Interference-Causing
Equipment Standard (ICES–001).
ISM indicates this is an Industrial Scientific and Medical Group 1 Class B product
(CISPR 11, Clause 4)
The Standby symbol is used to mark a position of the instrument power line
switch.
This symbol indicates separate collection for electrical and electronic equipment,
mandated under EU law as of August 13, 2005. All electric and electronic
equipment are required to be separated from normal waste for disposal
(Reference WEEE Directive, 2002/96/EC).
Indicates the time period which no hazardous or toxic substance elements are
expected to leak or deteriorate during normal use. Forty years is the expected
useful life of the product.
This symbol indicates the Environmental Protection Use Period (EPUP) for the
product’s toxic substances and for the China RoHS requirements.
CAUTION, risk of danger, refer to safety information in manual.
Dispose of properly
To Next Page
Loading...
Need help?
General
