Keysight E6680A - Page 1113

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
Preset 0
Status Bits/OPC depend-
encies
Sequential command
Operation Negative Transition
Determines which bits in the "Operation Condition Query" on page 1111 register will
set the corresponding bit in the "Operation Event Query" on page 1112 register
when the condition register bit has a negative transition (1 to 0).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:OPERation:NTRansition <integer>
:STATus:OPERation:NTRansition?
Example
:STAT:OPER:NTR 1
Align Now operation complete will be reported to the Status Byte Register
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Operation Positive Transition
Determines which bits in the "Operation Condition Query" on page 1111 register will
set the corresponding bit in the "Operation Event Query" on page 1112 register
when the condition register bit has a positive transition (0 to 1).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:OPERation:PTRansition <integer>
:STATus:OPERation:PTRansition?
Example
:STAT:OPER:PTR 1
Align Now operation beginning will be reported to the Status Byte Register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
1113 IQ Analyzer Mode User's &Programmer's Reference