Keysight E6680A - Page 1114

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
9.4.6.4 Operation Instrument Register
Monitors instrument-related operations and summarizes them in bit 11 of the
"Operation Register" on page 1110.
Bit Condition Operation
0 Instrument Locked The instrument is locked
Filter Registers
–
"Operation Instrument Condition" on page 1114
–
"Operation Instrument Enable" on page 1115
–
"Operation Instrument Event Query" on page 1115
–
"Operation Instrument Negative Transition" on page 1116
–
"Operation Instrument Positive Transition" on page 1116
Operation Instrument Condition
Returns the decimal value of the sum of the bits in the Status Operation Instrument
Condition register.
NOTE
The data in this register is continuously updated and reflects the current
conditions.
Remote Command
:STATus:OPERation:INSTrument:CONDition?
Example
:STAT:OPER:INST:COND?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
IQ Analyzer Mode User's &Programmer's Reference 1114