Table Of Contents
5 Preset 585
5.1 Preset Dropdown 588
5.2 Mode Preset 589
5.3 Restore Mode Defaults 591
5.4 Input/Output Preset 592
5.5 Full Mode Preset 593
5.6 User Preset 594
5.7 Save User Preset 596
5.8 User Preset All Modes 597
5.9 Restore Defaults All Modes 598
5.10 User Preset All Screens 599
5.11 Save User Preset All Screens 600
5.12 Restore Screen Defaults 601
5.13 Preset Type (Remote Command Only) 602
5.14 Restart Instrument (Shutdown) 603
5.15 Restart Application (Application Shutdown) 604
5.16 System Log Off (Remote Command Only) 605
5.17 Power Standby (Instrument Shutdown) 606
6 Input/Output 607
6.1 RF Source 608
6.1.1 RF Output 608
6.1.2 RF Output Port 608
6.1.3 Half Duplex Output Port 610
6.1.4 RF Power 611
6.1.5 T/R Port High Power Attenuator 611
6.1.6 Amplitude Setup 611
6.1.6.1 RF Power 611
6.1.6.2 Set Reference Power 615
6.1.6.3 Power Ref 616
6.1.6.4 Power Unit 616
6.1.6.5 Amptd Offset 617
6.1.6.6 Amplitude Increment 618
6.1.7 Frequency 618
20 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
