Keysight E6680A - Page 21

Table Of Contents
6.1.8 List Sequencer 618
6.1.8.1 Sequencer 619
6.1.8.2 Initiate Sequence 619
6.1.8.3 Repetition 620
6.1.8.4 Trig Out Type 620
6.1.8.5 Select Data Marker 620
6.1.8.6 Manual Trigger Now 621
6.1.8.7 List Sequencer Setup 621
Number of Steps 621
Go To Step 621
Insert Step Before 622
Delete Step 622
Clear List 622
Step Trigger 622
Transition Time 623
Band 624
Device 628
Freq/Chan 629
Power 630
Waveform 630
Waveform File 631
Step Duration 631
Duration Time 632
Play Count 633
Trig Out 634
Step Configuration (Remote Command Only) 634
Step Configuration of Step Trigger parameter list (Remote Command Only) 636
Step Configuration of Transition Time parameter list (Remote Command Only) 637
Step Configuration of Radio Band parameter list (Remote Command Only) 637
Step Configuration of Radio Band Link parameter list (Remote Command Only) 638
Step Configuration of Frequency/Channel Number parameter list (Remote Command
Only) 639
Step Configuration of Power parameter list (Remote Command Only) 639
Step Configuration of Waveform parameter list (Remote Command Only) 640
Step Configuration of Step Duration parameter list (Remote Command Only) 641
Step Configuration of Duration Time or Play Count parameter list (Remote Command
Only) 641
Step Configuration of Output Trigger parameter list (Remote Command Only) 642
Clear List (Remote Command Only) 642
6.1.8.8 Remote Software Trigger (Remote command Only) 643
6.1.8.9 Query List Sequence Initiation Armed Status (Remote Query
Only) 643
6.1.9 Frequency Setup 643
IQ Analyzer Mode User's &Programmer's Reference 21