EasyManua.ls Logo

Kinco FD5 Series - Page 19

Kinco FD5 Series
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Servo system installation
requirements and notes
Kinco FD5 AC series servo driver
manual
16
Corrosive gases
Please use the original packaging for storage and transportation, the original packaging provides
sufficient protection to avoid common problems.
Environmental conditions
Table 2-1 Environmental requirements
Environment
Conditions
Working
Temperature
0℃~40 (No ice)
Working
Humidity
595%RHNo condensation
Storage
Temperature
-10℃~70℃(No ice
Storage
Humidity
5~95%RHNo condensation
Protection
Level
IP20
Install
requirement
No sun and rain, no corrosive gas, no flammable gas, no oil and gas, dry and
dust-free, and well ventilated (such as electrical cabinets)
Altitude
There is no power limit when the altitude is below 1000m. When the working
altitude is above 1000m, the power usage needs to be reduced by 1.5% for
every 100m rise.
Vibration
Under 5.9m/s2 1060HzDo not connect at the resonance point

Table of Contents

Other manuals for Kinco FD5 Series

Related product manuals