Kinco FD5 Series - Position Mode(1)

Kinco FD5 系列伺服驱动器使用手册
第六章 工作模式介绍
86
6.4 Position mode(1)
In the position mode, the CD3 motor controller causes the motor to rotate to an absolute or
relative position. The position / velocity command is specified via Target_Position / Profile_Speed
or via position flow 。
Table 6-13 Position mode
Panel
address
Internal
address
Type
Name
Description
Value
D0.00
6060.00
8
Operation_Mod
e
Set the working mode to absolute/relative
position mode
1
607A.00
20
Target_Position
Target absolute / relative position
User defined
6081.00
20
Profile_Speed
Profile speed for positioning
User defined