Kinco FD5 Series - 2.3.2 Environment conditions

Chapter 2 Servo system installation
requirements and notes
Kinco FD5 AC series servo driver
manual
18
2.3.2 Environment conditions
Table 2-2 Environment conditions
Environment
Conditions
Working
Temperature
-20℃～40℃（no ice）
Working
humidity
Under 90%RH （no condensation）
Storage
temperature
-20℃～70℃（no ice）
Storage
humidity
5～95%RH（no condensation）
Vibration
Running: less than 49m/s2(5G)、Stopping: less than 24.5m/s2(2.5G)
Collision
Less than 98m/s2（10G）
Protection level
IP65，shaft end: IP54（Shaft end with oil seal: IP54，without oil seal: IP50）
Altitude
Highest altitude: 4000m，When the working altitude is above 1000m, the
power usage needs to be reduced by 1.5% for every 100m rise.