Kinco FD5 Series - Pulse Command Input

Kinco FD5 AC series servo driver
Chapter3 Installation and wiring
37
3.4.3 Pulse command input
Table 3-11 Pulse input wiring example
Instruction
Pulse input is divided into ordinary pulse input channel and high-
speed pulse input channel
High-speed pulse input channel supports RS422 differential signal,
voltage range DC3.3-5V, MAX pulse frequency 4MHz
Ordinary pulse input channel supports TTL/differential signal, voltage
range DC 3.3-30V, maximum frequency 500KHz
Ordinary pulse input
wiring example①
NPN Wiring method
Driver
27
29
24V
37
33
31
35
Ordinary pulse input
wiring example①
PNP Wiring method
Driver
27
29
24V
37
33
31
35
High-speed pulse input
wiring example①
NPN wiring method
Driver
27
19
5V
23
21
31
35