Kinco FD5 Series - 4.2 Panel menu structure and navigation

Kinco FD5 系列伺服驱动器使用手册
第四章 数字面板操作
44
P..L
Positive limit signal active
n..L
Negative limit signal active
Pn.L
Positive and negative limit signal active
FFF.F
The drive is not configured with the motor model
Blinking
Error
4.2 Panel menu structure and navigation
The following flowchart shows the main structure of the panel. The user can select single parameters,
modify values and access special functions using this flow.
Monitored state
SET
Power on
Node_ID
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
SET
SET
SET
SET
SET
UP
UP
UP
UP
UP
DOWN
DOWN
DOWN
DOWN
DOWN
F000 can choose the
monitored parameters
F002 can set the control
parameters
F003 can set the IO
parameters
F004 can set the
motor parameters
F005 can set the driver
parameters
Error history
CPU version
UP
forward
reverse
Figure 4-1 Parameters Setting
Attention
1.
The setting value is out of the setting range of the parameter.
2. The drive is in the enabled state, the parameters cannot be changed. You need to
cancel the enable state first