2.1.3 Drive usage requirements
⚫
Please ensure that this document is provided to design engineers, installers, and persons
responsible for commissioning and using machine or system of this product.
⚫
Please ensure that the requirements of this document are always followed. And please consider the
instructions for other components and modules connected to this product.
⚫
Please consider local legal requirements, as well as:
—Regulation and standards
—Regulations for testing organizations and insurance companies
—National standard specification
Transportation and storage requirements
⚫
Please ensure that the product is not overburdened during transportation and storage, including
—Mechanical load
—Temperature that exceeding the limit value
—Moisture
Danger！
⚫
Please make sure that the drive is installed securely and the screws are
tightened to prevent the drive from falling and hurting people during use.
⚫
Beware of electric shock ：
The power cable must be installed to the plug (X3).
Turn off the power when connecting cables.
Touching live parts can cause serious injury and possibly death.
⚫
When using this product, it must be installed in the electric box, and all
protective measures have been activated.
⚫
In the event of maintenance, repair, cleaning work and longtime shutting
down，beware before touching live parts：
- Turn off power to electrical equipment with the power switch and prevent it
from turning on again
- After the power is turned off, check the indicators on the front panel of the
unit. If the light is off, you can touch the drive.
-
When installing, avoid any foreign objects entering the servo drive. Conductive
or combustible foreign objects such as screws, metal chips, etc. entering the
servo drive may cause fire and electric shock.
- For safety reasons, please do not use damaged servo drives and servo
motors.
- Drive and motor power cables, brake cables and encoder cables must be
fixed and not stretched excessively.
- The servo drive must be grounded.
To Next Page
Loading...
