Kinco FD5 Series - Page 2

Preface and Product Confirmation
Thank you for using Kinco FD5 series of servo products.
FD5 series AC servo is an economical product launched by Kinco for the general servo market, with a
power range between 200W to 3KW. The new generation servo products support CANopen,
EtherCat, Modbus, Profinet and other communication protocols. The servo products can be widely
used in logistics, 3C electronics, printing and packaging, textile machinery, woodworking machinery,
lithium batteries and new energy automobile industry.
Please read the manual carefully and follow the operating instructions, it can help you set up the
drive correctly and make the drive perform optimally.
The accessories of different models of Kinco FD5 series drives are different. We recommend
that you confirm the product carefully before use.
Confirmation
⚫ Please confirm whether the product is damaged during transportation
⚫ Please confirm the motor model, drive model, and motor wiring model are consistent with
the model you ordered according to the nameplate information on the drive and motor.
⚫ Please confirm whether the terminal accessories of the drive is complete, and the motor oil seal and
keys are complete on the drive.
Product Model
Accessories with Quantity
FD425-PA-000
FD425-CA-000
FD425-LA-000
Main power terminal (including auxiliary wiring tools)*1,
D-sub36P plug*1, certificate*1, service guide*1,
desiccant*1
FD435-CA-000
FD435-LA-000
FD435-PA-000
4P power line terminals*1, 9P main power terminals
(including auxiliary wiring tools and short wires)*1, D-
sub36P plug*1, certificate of conformity*1, service
guide*1, desiccant*1
FD625-CA-000
FD625-LA-000
FD625-PA-000
If there is any problem with any of the above, please contact Kinco or your supplier to solve it.