Section 6 Request 6-25
2.5.5.3 Scheme
Once a satisfactory setting is achieved, it can be saved as a scheme for actual use.
Schemes not required can be removed as well.
2.5.5.4 Fold Patterns (available)
The Request program reads settings on the printer (presets.ini file in the LOGDIR
folder) and displays the folding patterns available in a dropdown menu. These
pattern types are configurable by the technician.
2.5.5.5 Roll Size
Allows roll selection to be automatic (closet) or precise (exact). Please note that
some images may need to be exact or the correct fold pattern will not be attained. If
Exact is chosen then the media width of the file must also be installed in the printer.
2.5.5.6 Matrix Folding
KIP Request also incorporates Matrix Folding. Users can select different folding
schemes for individual documents within a set. (see 2.3.5)
2.5.6 Header Label
A header can be placed on the top or bottom of each print.
This can allow for easy document identification of the prints.
Information from the Key Job Settings (Requester and Job
Number) are included as well as the file name, date and
time of printing
2.5.7 Mirror
Mirror the image on the print.
2.5.8 Invert
Inverts the image on the print(s).
( makes black area white and a white area black)
To Next Page
Loading...
