Section 1 Basic Printer Functions
1-39
2. 6 Dehumidifying the Roll Media
If the roll paper is stored in an extremely humid location, it may cause poor prints.
You will most likely experience “creasing” and “voids”.
Turn on the Dehumidify Heater if the room air has too much humidity (65% or higher) to prevent the
above kinds of print defect.
You may be able to fix the above kinds of problem.
Normal Print
Normal Print
If the media contains
excess humidity
If the media contains
excess humidity
Creasing
Voids
NOTE
Re-appearance of image (especially solid black image) may occur if you print with humidified
film.
When film is installed in a high humidity environment (higher than 60%RH), we recommend
that you turn on the Dehumidify Heater.
Normal print Re-appeared image
To Next Page
Loading...
