Section 1 Basic Printer Functions 1-1
Section 1
Basic Printer Functions
1.0 Before Use 1- 3
1. 1 Installation Requirements 1- 3
1. 2 Prohibited Originals 1- 4
1. 3 Key Features 1- 5
1. 4 Specifications 1- 6
1. 5 Exterior Views 1- 7
1. 5. 1 Front view 1- 7
1. 5. 2 Rear view 1- 8
1. 5. 3 Touchscreen / Sub Display 1- 9
1. 6 Display during Normal Operation 1- 13
1. 7 Optional Configurations 1- 17
1. 8 Media Specifications 1- 18
1. 8. 1 Print Sizes 1- 18
1. 8. 2 Media not to be Used 1- 19
1. 8. 3 Maintaining the Media 1- 20
1. 8. 4 Environmental Condition – Correction 1- 21
2.0 Basic Functions 1- 23
2. 1 Turning on the Printer 1- 23
2. 2 Turning off the Printer 1- 25
2. 3 Replacing the Roll Media 1- 26
2. 4 Replacing the Toner Cartridge 1- 34
2. 5 Setting Cut Sheet Paper 1- 38
2. 6 Dehumidifying the Roll Media 1- 39
3.0 User Modes 1- 42
3. 1 User Modes 1- 42
3. 2. 1 User Mode 0: Image Area Expanded 1- 43
3. 2. 2 User Mode 1: Image Enhancement Setting 1- 44
3. 2. 3 User Mode 2: Auto Power Off Timer Setting 1- 46
3. 2. 4 User Mode 3: Auto Power Off Setting 1- 47
3. 2. 5 User Mode 4: Cold Sleep Timer Setting 1- 48
3. 2. 6 User Mode 5: Cold Sleep Setting Mode 1- 49
3. 2. 7 User Mode 6: Warm Sleep Timer Setting 1- 50
3. 2. 8 User Mode 7: Warm Sleep Setting 1- 51
3. 2. 9 User Mode 8: Short Interval Setting 1- 52
3. 2.10 User Mode 9: L/L Environment Setting 1- 53
3. 2.11 User Mode A: H/H Environment Setting 1- 54
To Next Page
Loading...
