Section 1 Basic Printer Functions 1-72
4. 4 Call Service Errors
The following error codes will be displayed on the Sub Display if the machine has a fatal error. It is
impossible for the user to resolve these issues.
PLEASE CALL YOUR CERTIFIED SERVICE TECHNICIAN TO RESOLVE THESE ERRORS.
Error Code Name of the error
E - 01 Fuser Temperature Rising Error
E - 02 Fuser Over Temperature Error
E - 04 Developer Error
E - 06 Counter Error
E - 07 Cutter Error
E - 14 Fuser Motor Error
E - 16 Wire Cleaning Error
E - 21 Fuser Thermostat Error
E - 40 Outer Device Error
E - 41 Key Card Error
E - 51 High Voltage Power Error
If one of the above errors is displayed:
1) Turn off the printer, wait approximately 30 seconds, and then turn the printer on again.
2) If the same error code is displayed, turn off the printer, and unplug the printer from the wall. Call
your certified service technician.
To Next Page
Loading...
