Section 1 Basic Printer Functions
1-24
3) On the touchscreen upper right corner is an indicator that displays the status of the printer. If
it is orange and flashing the printer is warming up. When it is green then the printer is ready
to print. Warming up may take up to 8 minutes, from room temperature.
Warming Ready
4) There is also an Indicator on the Operation Panel. When it lights red the printer is warming
up.
5) When the Fuser is warmed, the Ready Indicator light will change to green and the printer is
ready. This may take up to 8 minutes, from room temperature.
6) Print from your computer or copy from the scanner.
MENU ENTER TEST
TONER REMAIN IMAGE DENSITY
job
NOTE
It is impossible to make any prints when the light is Red.
Please wait until the light turns Green.
Ready Indicator
To Next Page
Loading...
