2G0947 - 31JAN08 5-5
Diagnostics
Machine Control System (MCS) Printer Status Messages
The following table describes how the LOCAL PANEL and Web Portal indicate
printer status to the user.
Table 5-2: MCS Printer Status Messages
Printer
Status
Local Panel Display
Web Portal
Display
DICOM Status Description
Any FILM
SUPPLY
Open
• Ready LED off
• Supply display is
blanked for open
supply
• Status code: 20702
Not Ready WARNING /
COVER OPEN
At least one of the FILM
SUPPLIES is open (not
inserted and latched into
place.
DOOR Open • Ready LED off
• Attention LED on
• Status code: 20701
Hood Open WARNING /
COVER OPEN
The TOP COVER or
FRONT PANEL is open or
one of the side PANELS is
removed. The IMAGER is
not "Ready".
Failed • Ready LED off
• Error LED on
• Error code shown
Failed See Error Code An error has occurred that
prevents printing.
IMAGER
Unlock
Requested
• Ready LED off
• Unlock Button/LED
flashing for the
requested FILM
SUPPLY
Not Ready n/a The printer will complete
any prints in progress.
Offline • Ready LED off
• Attention LED on
• Status code: 20704
Printing
Disabled
WARNING /
PRINTER
OFFLINE
The printer has been
disabled.
Printing • Ready LED flashing Printing NORMAL The IMAGER is currently
printing films.
Ready • Ready LED on
• Supply display shows
count, type, and size
for each film supply
Ready NORMAL The IMAGER is online and
the PROCESSOR has
reached operating
temperature.
Self-test • Ready LED off
•Network LED off
• the display shows the
Carestream Health
logo
Self-test WARNING /
PRINTER INIT
This occurs when power is
first applied to the MCS.
Service
Mode
• Ready LED off
• Attention LED on
• Status code: 20700
Service Mode WARNING /
PRINTER
OFFLINE
The SERVICE SWITCH is
enabled. The IMAGER is
not "Ready".
To Next Page
Loading...
