Kodak Dryview 5800 - Page 160

5-12 2G0947 - 31JAN08
Diagnostics
Condition Code: 01-002
Description
An error occurred while reading the Configuration and Control Subsystem
configuration information.
System Impact
The Configuration and Control Subsystem may not execute correctly.
User Action
None
FE Action
None, this is a log notification only.
Condition Code: 01-004
Description
An error occurred while attempting to start subsystem xxxx.
System Impact
The subsystem in question will not be started.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Web Portal Message Log Message DICOM Message Severity
None Error reading configuration
information.
NORMAL 2-Warning
Web Portal Message Log Message DICOM Message Severity
MIM Core: Internal Software
Error
Error starting subsystem xxxx NORMAL 1-Alert