Kodak Dryview 5800 - Page 236

5-88 2G0947 - 31JAN08
Diagnostics
Condition Code: 27-608
Description
This notification occurs when the laser dynamic range has been adjusted and its
value is within 10% of the xxxxx or lower limit of the adjustment range.
System Impact
None - the system will function normally.
User Action
None
FE Action
None, this is a log notification only.
Condition Code: 27-609
Description
This notification occurs when the maximum LASER power measured by the
optics calibration and diagnostics is approaching the predefined valid limit.
System Impact
None - the system will function normally.
User Action
None
FE Action
None, this is a log notification only.
Web Portal Message Log Message DICOM Message Severity
None Optics calibration detected laser
dynamic range approaching
predefined limits
NORMAL 3-Notify
Web Portal Message Log Message DICOM Message Severity
None Optics calibration detected
Optics Maximum Power
approaching limit
NORMAL 3-Notify