104
■ 6.1–1d: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“FF/REW Speed,” “Set Location,” (1.1–1d)
“Copy KARMA Module” (PROG 6.1–1c), “Select by Cate-
gory” (PROG 3.1–3b)
“Init KARMA Module” (COMBI 6.1–1d)
6.1–2: MIDI I/O
Specifies the MIDI input/output channels for the four
KARMA modules used by a Sequencer mode song.
MIDI data from the keyboard or the MIDI IN connector that
matches the MIDI input channel specified for a KARMA
module will be input to that KARMA module. (See the dia-
gram below, “KARMA – MIDI Input/Output Channel.”)
The MIDI data from each KARMA module will be transmit-
ted on the MIDI output channel specified for that KARMA
module, and will be sounded by tracks with matching chan-
nels. For real-time recording, data will be recorded on tracks
with matching channels.
These settings make it possible to use multiple KARMA
modules, and simultaneously play multiple tracks of
different MIDI channels. If you wish to real-time record
such a performance, use multi-track recording mode
(Multi REC (1.1–6a)).
6.1–2a: Input Channel, Output Channel, T.Thru
(KARMA Off)
A/B/C/D Input Channel [01...16, Tch]
Specifies the MIDI input channel for each KARMA module.
MIDI data from the keyboard or MIDI IN connector that
matches the specified MIDI channel will be input to that
KARMA module.
Tch: Automatically match the MIDI channel (3.1–1(2)a) of
the track selected by “Track Select” (1.1–1c).
A/B/C/D Output Channel [01...16, Tch]
Specifies the MIDI output channel for each KARMA mod-
ule. The MIDI data from each KARMA module will be
transmitted on the specified MIDI channel, and will be
sounded by tracks with the matching channel.
Tch: Automatically match the MIDI channel (3.1–1(2)a) of
the track selected by “Track Select” (1.1–1c).
[Example 1]
With the following settings, switching “Track Select” (the
track you play) to change programs will also switch to a dif-
ferent KARMA module at the same time, causing a different
phrase to play. (See the diagram “Example 1” at the bottom
of the next page.)
1 Set Track 1 as follows.
“Program Select”: a Guitar category program
“MIDI Channel”: 01
2 Set Track 2 as follows.
“Program Select”: a Bass category program
“MIDI Channel”: 02
3 Set KARMA module [A] as follows.
“GE Select”: a riff of GE category Guitar
“Input Channel”: 01
“Output Channel” 01
6.1–2a
6.1–2b
KARMA - MIDI Input / Output Channel
MIDI IN
Track Select = Track01
16ch
01ch
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
02ch
03ch
04ch
05ch
06ch
01ch
KARMA ON/OFF = ON
KARMA Module [A]
In : 01ch
Out : 01ch
KARMA Module [B]
In : 01ch
Out : 02ch
KARMA Module [C]
In : 01ch
Out : 03ch
KARMA Module [D]
In : 16ch
Out : 04ch
To Next Page
Loading...
Need help?
General
