Korg Karma - S.play 6.3: Karma Ge; 1: Ge P

S.PLAY
1.1
2.22.33.14.14.26.16.26.36.47.17.27.3
127
In Song Play mode, this can be turned on/off for each
KARMA module. KARMA modules for which this setting is
turned on will be in Latch On mode when the [LATCH] key
is on (LED lit).
☞ p.31 PROG 6.2–2a: Trigger/Latch, “Note Latch”
Env1:/Env2:/Env3:
Env1 Trigger/Env2 Trigger/Env3 Trigger
[Any, AKR, 1st, Dyn]
Env1 Latch/Env2 Latch/Env3 Latch
[Off, Sus1, Rel1, Sus2, Rel2]
☞ p.31 PROG 6.2–2a: Trigger/Latch
6.2–2b: Clock Advance
Mode (Clk Adv. Mode) [Auto...Auto+Dyn2]
Size (Clk Adv. Size) [3..., Event]
ChdMode (Chord Mode)
[Off, 1st, Chrd1, Chrd2, Chrd3]
VelSensBtm (Vel Sens Bottom) [001...127]
☞ p.32 PROG 6.2–2b: Clock Advance
6.2–2c: Module Trigger
Trigger by Mod (Trigger by Module) [Off, A, B, C, D]
Module% [000...100]
Cutoff (Cutoff Module) [Off, On]
☞ p.62 COMBI 6.2–2c: Parm2, Module Trigger
■ 6.2–2d: UTILITY
☞ “GM Initialize” (1.1–1b)
“Solo Selected Track,” “Set Location” (SEQ 1.1–1d)
“Copy KARMA Module” (PROG 6.1–1c), “Select by Cate-
gory” (PROG 1.1–3b)
“Init KARMA Module” (COMBI 6.1–1d)
Here you can edit the parameters of the GE selected for each
KARMA module. If you assign the GE parameters to the
KARMA Real-time Controls, you will also be able to control
the phrase or pattern in real-time during playback.
6.3–1: GE P..4 (GE Parameter 1...4)
6.3–2: GE P..8 (GE Parameter 5...8)
6.3–3: GE P..12 (GE Parameter 9...12)
6.3–4: GE P..16 (GE Parameter 13...16)
6.3–1(2)(3)(4)a: GE Parameter, Value, Asgn
(Assign), Pol (Polarity)
GE Parameter
Value
Asgn (Assign) [---, ...Dyn4]
Pol (Polarity) [–, +]
☞ p.32 PROG 6.3–1a: “GE Parameter,” “Value,” “Asgn,”
“Pol”
■ 6.3–1(2)(3)(4)b: UTILITY
☞ “GM Initialize” (1.1–1b)
“Solo Selected Track,” “Set Location” (SEQ 1.1–1d)
“Copy KARMA Module” (PROG 6.1–1c), “Select by Cate-
gory” (PROG 1.1–3b)
“Init KARMA Module” (COMBI 6.1–1d)
S.PLAY 6.3: KARMA GE
6.3–1b6.3–1a