COMBI
1.1
2.12.22.33.13.23.33.44.14.24.34.46.16.26.36.47.17.27.3
63
6.4–1: RTP ..4 (RT Parameter 1...4)
6.4–2: RTP ..8 (RT Parameter 5...8)
☞ p.34 PROG 6.4–1: RTP ..4 (RT Parm 1...4), 6.4–2: RTP ..8
(RT Parm 5...8)
6.4–1(2)a/b/c/d: RT Parm 1...4, RT Parm 5...8
Grp (Param Group) [Off, Mix, Ctrl, Trig, Zone]
☞ p.34 PROG 6.4–1(2)a/b/c/d: RT Parm 1–4, RT Parm 5...8
Parameter [---, Run...Tr.Oct/5 OutZ]
Group: Mix
Run [0, +1]
Assign the function of “Run” (1.1–4b, 6.1–1b).
0: Off
+1: Run
☞ p.47 “Run Check Box” (1.1–4b)
Group: Trig
Trig by Mod [0...+4]
Assign the function of “Trigger by Mod” (6.2–2c).
0: Off
+1: A
+2: B
+3: C
+4: D
☞ p.62 “Trigger by Mod (Trigger by Module)” (6.2–2c)
Module% [0...+100]
Assign the function of ”Module%” (6.2–2c).
☞ p.62 “Module” (6.2–2c)
Min (Parm Min Value) [---, –0036...+5000]
Max (Parm Max Value) [---, –0036...+5000]
Value (Parm Value) [---, –0036...+5000]
A/B/C/D (Parm Module A/B/C/D) [Off, On]
Specifies whether the RT Parm settings settings will be valid
for each module.
On (checked): The RT Parm settings settings will be valid.
Off (unchecked): The RT Parm settings settings will be
ignored.
Asgn (Parm Assign) [---, ...Dyn4]
☞ p.34 PROG 6.4–1(2) a/b/c/d: RT Parm 1...4
6.41(2)e: UTILITY
☞ “Write Combination,” “Solo Selected Timbre” (1.1–1c)
“Copy KARMA Module” (PROG 6.1–1c)
“Init KARMA Module” (6.1–1d)
6.4–3: DynMIDI (Dynamic MIDI)
☞ p.36 PROG 6.4–3: DynMIDI (Dynamic MIDI)
6.4–3a/b/c/d: Dyn MIDI1...4
Input (Dyn1...4 Input Module) [A...D]
Indicates either A, B, C, or D as the KARMA module that
will be the Dynamic MIDI “Source” input.
MIDI control data that matches the “Input CHANNEL”
(6.1–2a) of the KARMA module that you select here will be
used as the “Source.” If the “Source” is “Note In Z” or “Note
Out Z,” the zone will be the key zone (6.1–3a) of the
KARMA module that you select here.
Source (Dyn1...4 Source) [Off, JS+Y #01...Vel Out Z]
Btm (Dyn1...4 Range-Btm) [000...127]
Top (Dyn1...4 Range-Top) [000...127]
Act (Dyn1...4 Src Action) [M, T, C]
Destination (Dyn1...4 Destination)
[Off, RTParm Ctrl...Buffer Latch]
☞ p.36–PROG 6.4–3a/b/c/d: Dyn MIDI1...4
A/B/C/D (Dyn1...4 Module A/B/C/D) [Off, On]
L (Dyn1...4 Last Triggered) [Off, On]
Specifies the modules for which the Dyn MIDI1...4 settings
will be valid.
On (checked): The Dyn MIDI settings will be valid.
Off (unchecked): The Dyn MIDI settings will be ignored.
“A/B/C/D”: The settings will be valid for KARMA mod-
ules [A], [B], [C], and [D] respectively.
“L”: The settings will be valid only for the last-triggered
KARMA module [A], [B], [C], or [D].
Pol (Dyn1...4 Polarity) [Off, On]
☞ p.36–PROG 6.4–3a/b/c/d: Dyn MIDI1...4
6.4–3e: UTILITY
☞ “Write Combination,” “Solo Selected Timbre” (1.1–1c)
“Copy KARMA Module” (PROG 6.1–1c)
“Init KARMA Module” (6.1–1d)
COMBI 6.4: Ed-KARMA RT
6.4–1e
6.4–1a
6.4–1b
6.4–1c
6.4–1d
6.4–3e
6.4–3a
6.4–3b
6.4–3c
6.4–3d
To Next Page
Loading...
Need help?
General
