Appendices
259
You can’t undo this operation Are you sure ?
Meaning: When you exit recording or event editing in
Sequencer mode, the memory area for Undo
(Compare function) is not allocated. If you wish to
keep the data that was just recorded or edited,
press the [F8] (“OK”) key. If you wish to return to
the previous data (i.e., to delete the data that was
just recorded or edited), press the [F7] (“Cancel”)
key.
Meaning: When editing in Sequencer mode, memory area
for Undo (Compare function) cannot be allocated.
If you wish to execute the edit, press the [F8]
(“OK”) key. (It will not be possible to return to the
state before editing.) If you decide not to execute
the edit, press the [F7] (“Cancel”) key.
Action: In order to allocate memory area for Undo (Com-
pare function), delete unneeded data such as
songs, tracks, or patterns. We recommend that
you save data to floppy disk before you execute
the edit operation.
To Next Page
Loading...
