Appendices
271
MOSS.SNG
Cue List
Song (TRITON, TRITON Pro, TRITON ProX song file)
“Feet Hurt MOSS” by Scott Frankfurt
©1999 Bleach Bros. Music (breachbros@earthlink.net) – all
rights reserved
The .PCG files and .SNG files on the floppy disks
included with the EXB-PCM series or EXB-MOSS are
for the TRITON series. (As of December 2000)
Since the KARMA workstation does not have the
arpeggiator function of the TRITON series, the
arpeggiator-related parameters included in the pro-
grams, combinations, and songs will be ignored when a
.PCG or .SNG file is loaded, and will not function.
These .PCG and .SNG files do not contain settings for
the KARMA function. When these files are loaded, all
parameters related to the KARMA function will be ini-
tialized.
Also, the category of the programs or combinations
may be inappropriate. For other details on data com-
patibility with the TRITON series, refer to PG p.260.
Program bank F contains program data for the MOSS tone
generator. Load this data into MOSS tone generator pro-
gram bank F of this instrument.
Combination bank B (000...063) contains combinations that
use the bank F programs. Load this data into any combina-
tion bank E of this instrument.
The remaining program banks A, B, C, D, combination
banks A, C, D, drum kits, arpeggio patterns, global settings,
and cue list is data for the TRITON.
When loading the MOSS.PCG file into this instrument,
you must be sure to load only the data for Program
Bank F and Combination Bank B. If you load any other
data, the preloaded data of this instrument will be over-
written. When you load MOSS.SNG, the Cue List will
not be loaded into this instrument.
Loading from the included floppy disk
How to load the bank F programs
1 Insert the “MOSS00FD” floppy disk into the disk drive.
2 Press the [DISK] key to enter Disk mode.
The following display will appear in the LCD screen.
3 Select “Bank F” (bank F programs).
Use the cursor keys [ ], [ ] to select “MOSS.PCG,”
and press the [F6] (“OPEN”) key to open the file. In the
same way, select “Bank F” within “Programs.”
4 Press the [F8] (“UTILITY”) key to access the utility menu,
press the [F7] key to choose “Load Selected,” and press
the [F8] (“OK”) key.
The Load Program Bank F dialog box will appear.
5 Press the [F8] (“OK”) key.
Only the program data of bank F from the “MOSS00FD”
floppy disk will be loaded into program bank F of this
instrument.
How to load the bank B combinations
Here’s how to load the data into combination bank F.
1 If you have modified the program settings or the order of
banks A or B, load banks A and B from the disk included
with this instrument. The EXB-MOSS combinations B use
bank F programs as well as the preloaded program banks
A and B. This means that if you load EXB-MOSS combi-
nations B, you must also load the preloaded program
banks A and B. (☞BG p.93 “Loading data”)
2 Use the cursor keys [ ], [ ] to select “Combinations,”
and press the [F6] (“OPEN”) key.
3 Use the cursor keys [ ], [ ] to select “Bank B.”
4 Press the [F8] (“UTILITY”) key to access the utility menu,
press the [F7] key to choose “Load Selected,” and press
the [F8] (“OK”) key.
The Load Combination Bank B dialog box will appear.
5 Use the VALUE [ ], [ ] keys to select Bank F for “To.”
In consideration for loading the preloaded data and
EXB-PCM series data, we recommend that you load
this data into bank F.
6 Press the [F8] (“OK”) key.
Only the bank B combination data from the
“MOSS00FD” disk will be loaded into bank F of this
instrument.
How to load MOSS.SNG into the demo song
MOSS.SNG is a song file that uses the programs of bank F,
etc.
1 Perform steps 1–2 of “How to load the bank F pro-
grams.”
2 Use the cursor keys [ ], [ ] to select “MOSS.SNG.”
To Next Page
Loading...
Need help?
General
