EasyManuals Logo

Kurzweil K2600 Series User Manual

Kurzweil K2600 Series
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
2-4
Diagnostics
Description of Tests
Description of Tests
LCD
This test writes a group of characters to the LCD and veries that the same characters can be
read back again. The LCD Test includes four test phases that run automatically. The four steps
include the following:
1. Data test phase for the LCD character display memory
2. Address test phase for the LCD character display memory
3. Data test phase for the LCD graphics display memory
4. Address test phase for the LCD graphics display memory
The data test phase repeatedly writes the following 17-byte data pattern to the LCD:
0x00, 0xFF, 0x00, 0x0F, 0xF0, 0xCC, 0x33, 0xAA, 0x55, 0x11, 0xEE, 0x22, 0xDD, 0x44, 0xB,
0x88, 0x77
After the pattern is written, it is read back. If a difference is detected, the test fails.
The address test phase writes consecutive values to consecutive locations in the LCD. Then
these values are read back. If a difference is detected, the test fails.
A failure of this test indicates a problem with the LCD, Engine Board, connections between the
two boards or related circuitry.
Engine Blk (Engine Block)
This test computes an observed 32-bit check value of the setup area of the Flash ROMs (U4 and
U5) on the Engine Board. This value is then compared to the expected value, which is stored in
the ash itself. If the values differ, an error is reported.
If this test fails, install the latest Operating System and run the test again.
A failure of this test indicates a problem with the microcontroller, Flash ROMs, or related
circuitry on the Engine Board.
Object Blk (Object Block)
This test computes an observed 32-bit check value of the setup area of the Flash ROMs (U4 and
U5) on the Engine Board. The value is then compared to the expected value, stored in the Flash
ROMs. If the values differ, the test fails.
If this test fails, install the latest Operating System and Objects and run the test again.
A failure of this test indicates a problem with the Flash ROMs or related circuitry on the Engine
Board.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kurzweil K2600 Series and is the answer not in the manual?

Kurzweil K2600 Series Specifications

General IconGeneral
Polyphony48 voices
Multitimbral16 parts
MIDIIn, Out, Thru
TypeWorkstation
Synthesis MethodVAST (Variable Architecture Synthesis Technology)
Keyboard61, 76, or 88 keys
Sequencer16-track sequencer
DisplayLCD
SamplingYes, with optional sampling option
StorageFloppy disk
Audio OutputsStereo outputs
Audio InputsStereo inputs

Related product manuals