2-37
Installing and Setting up the Machine > Network Setup
4
Select [Maintenance].
5
[Wi-Fi Setup Tool] > [Run]
6
Configure the settings.
1 [Do not use automatic configuration] > [Next] > [Next]
2 [Use LAN cable] > [Next] > [Next]
3 [Easy setup] > [Next]
The machine is detected.
4 Select the machine > [Next]
5 Select [Use the device settings.] on [Authentication mode], and enter the login user
name and password. Login user name and Password are both Admin.
6 Configure the communication settings > [Next]
7 Change the settings of access point as necessary > [Next]
The network is configured.
Wireless LAN Connection by Using Wi-Fi Direct
1
Display the screen.
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Wi-Fi Direct
Settings]
2
Configure the settings.
"Wi-Fi Direct": [On] > [Close]
• Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search
the machine.
• If the machine is not detected, select [Advanced setup] > [Next]. Select [Express] or
[Custom] as device discovery method and specify the IP address or host name to
search the machine.
To Next Page
Loading...
