5-52
Operation on the Machine > Using Document Boxes
Editing Box Details
1
Select [Add/Edit] in the box list screen.
2
Select the box whose details you wish to edit and select [Edit].
3
Edit the box details.
Enter new details.
4
If you have changed the details, select [OK] and then select
[OK] in the confirmation screen.
If you do not change the details, select [Cancel].
5
Select [Close].
The display returns to the default Document Box screen.
Previewing Documents/Checking Document Details
1
Select a document to preview and then select [Others] >
[Preview].
2
Preview the document or check the document details.
The operations available in the preview screen are shown below.
3
Confirm the document and select [Close].
If a custom box is protected by a password, enter the correct password.
1Zoom out.
2Zoom in.
3 Select to select any page of the open document
and print, send or copy to USB Drive.
Selecting a Page
(page 5-53)
4 Sends the selected documents.
5 Prints the selected documents.
The preview display can be controlled by moving your finger(s) on the touch panel.
Original Preview (page 2-24)
3ULQW 6HQG 6HOHFW3DJHV =RRP2XW=RRP,Q
&RORU
5HVROXWLRQ
6L]H
$
[GSL
To Next Page
Loading...
