Kyocera 408ci - Page 291

6-8
Using Various Functions > Functions Available on the Machine
Advanced Setup
Configure the
settings for
transmission copy,
encrypted
transmission, and
file size
confirmation.
Border Erase/Full
Scan
Erases the black border that forms around the
image.
page 6-48
Erase Shadowed
Areas
When scanning with the document processor
open, erase the extra shaded area.
page 6-49
Zoom Adjust the zoom to reduce or enlarge the image.
page 6-42
Job Finish Notice Sends E-mail notice when a job is complete.
page 6-69
Fax Delayed
Transmission
Set a send time. Refer to FAX
Operation
Guide.
File Name Entry Adds a file name.
page 6-69
Continuous Scan Scans a large number of originals in separate
batches and then produce as one job.
page 6-68
Email Subject/
Body
Adds subject and body when sending a
document.
page 6-82
iFax Subject/Body Adds subject and body when sending a
document by i-FAX.
Refer to FAX
Operation
Guide.
Fax Direct
Transmission
Sends FAX directly without reading original data
into memory.
Refer to FAX
Operation
Guide.
Centering Centers the original image on the paper when
sending onto paper different from the original
size.
page 6-46
Fax Polling RX Dial the destination and receive documents for
Polling Transmission stored in the polling box.
Refer to FAX
Operation
Guide.
Send and Print Prints a copy of the document being sent.
page 6-82
Send and Store Stores a copy of the document being sent in a
Custom Box.
page 6-82
FTP Encrypted TX Encrypts images when sending via FTP.
page 6-83
Text Stamp You can add a text stamp on the documents.
page 6-61
Bates Stamp You can add a bates stamp on the documents.
page 6-65
File Size
Confirmation
Checks the file size before sending/storing the
original.
page 6-83
Fax TX Report Print a report of fax transmission results. Refer to FAX
Operation
Guide.
Global Navigation Function Description
Reference
page