6-17
Using Various Functions > Functions Available on the Machine
Functions
Configure the
settings for color
selection and
document name
when storing the
document in the
USB drive.
Border Erase/Full
Scan
Erases the black border that forms around the
image.
page 6-48
Erase Shadowed
Areas
When scanning with the document processor
open, erase the extra shaded area.
page 6-49
Continuous Scan Scans a large number of originals in separate
batches and then produce as one job.
page 6-68
File Name Entry Adds a file name.
page 6-69
File Format Specify the image file format. Image quality level
can also be adjusted.
page 6-76
Job Finish Notice Sends E-mail notice when a job is complete.
page 6-69
File Separation Creates several files by dividing scanned original
data page by specified number of pages, and
sends the files.
page 6-81
Text Stamp You can add a text stamp on the documents.
page 6-61
Bates Stamp You can add a bates stamp on the documents.
page 6-65
Detect Multi-fed
Originals
When reading a document from the document
processor, if the multiple feeding of documents is
detected, then the reading stops automatically.
page 6-72
Detect Stapled
Originals
When reading a document from the document
processor, if a stapled document is detected,
then the reading stops automatically.
page 6-72
Skip Blank Page When there are blank pages in a scanned
document, this function skips the blank pages
and stores only pages that are not blank.
page 6-73
Contrast You can adjust the contrast between light and
dark areas of the image.
page 6-41
Quiet Mode Lower print and scan speed for quiet processing.
page 6-73
Long Original Reads long-sized original documents using a
document processor.
page 6-75
Global Navigation Function Description
Reference
page
To Next Page
Loading...
