8-3
Setup and Registration (System Menu) > System Menu
Refer to System Menu Settings on the following page and configure as needed.
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges or
as a user with privileges to configure this setting. The factory default login user name and login password are set as
shown below.
• If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
