8-61
Setup and Registration (System Menu) > System Menu
Ping
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Ping]
Bonjour
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Bonjour]
IP Filter (IPv4)
[System Menu/Counter] key > [Network Settings] > "Network Settings" [IP Filter (IPv4)]
Depending on the protocol, there are models where you need to restart the network or turn the machine OFF
and then ON after changing the setting.
Item Description
Ping Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
If [Primary Network (Client)] is set to [Others], this item is not displayed.
Primary Network (Client)
(page 8-66)
Ping Timeout Ping Timeout (page 8-10)
Item Description
Bonjour Protocol
Settings
Select whether to use Bonjour.
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Item Description
IP Filter (IPv4) Configure IP filters. IP filters restrict access to the machine based on the IP addresses and
protocols.
Specify the IP addresses or network addresses of the hosts to which access is granted from
Command Center RX. If nothing is specified on this page, access from all hosts is allowed.
Value: Off, On
Command Center RX User Guide
To Next Page
Loading...
