8-67
Setup and Registration (System Menu) > System Menu
Device Security Settings
[System Menu/Counter] key > [Security Settings] > "Device Security Settings"
USB Drive This locks and protects the USB memory slot.
Value: Unblock, Block
This function is available when USB Host is set to [Unblock].
Optional Interface 1 This locks and protects the optional interface slots.
Value: Unblock, Block
You can set this feature for each slot.
Optional Interface 2
Restart Entire Device Restart the machine without turning the power switch off.
After changing "Interface Block Setting", restart the network or turn the machine OFF
and then ON.
Item Description
Unusable Time
*1
*1 Displayed only when the optional FAX Kit is installed.
Set a time period during which the machine will not print received faxes.
FAX Operation Guide
Display Status/Log Display Status/Log (page 8-48)
Security Level Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
This function is available when you have logged in as machine administrator.
Adding a User (Local User List) (page 9-7)
Remote Printing Remote Printing (page 8-46)
Software Verification Verify the installed software.
Select [Start] to start verification.
If an error occurs during software verification, contact your dealer or service representative.
Item Description
To Next Page
Loading...
