10-15
Troubleshooting > Responding to Error Messages
K
L
M
Error Message Checkpoints Corrective Actions Reference
Page
KPDL error.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— PostScript error has occurred.
The job is canceled. Press [End].
—
Error Message Checkpoints Corrective Actions Reference
Page
Low temperature. Adjust room
temp.
— Adjust the temperature and the humidity
of your room.
—
Error Message Checkpoints Corrective Actions Reference
Page
Machine failure. — Internal error has occurred. Make a note
of the error code displayed on the touch
panel, and contact your Service
Representative.
—
Maximum number of scanned
pages.
Is the acceptable scanning count
exceeded?
Only one copy of the scanned pages is
available.
Press [Continue] to print, send or store
the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
—
Memory card error. — Job is canceled. Press [End]. —
Memory is full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
—
— The process cannot be performed due
to insufficient memory. If only [End] is
available, press [End]. The job will be
canceled.
—
To Next Page
