LAWO POWER CORE - Ember+ Logical Functions; Ember+ Internal Src Control

Power Core User Manual Version: 6.6.0/3 397/539
20. Configuring Custom Logical Behaviour
20.30 Ember+ Logical Functions
The Ember+ Internal elements can be used to trigger source or summing bus Ember+ parameter values (from
a control signal), and report back their status. Three different elements are supported: Ember+ Internal
Source Control, Ember+ Internal Source Query and Ember+ Internal Function Call.
For a guide to all of the system's parameter paths and values, please see the Ember+ Tree.
20.30.1 Ember+ Internal Src Control
"Ember+ -> Ember+ Internal SrcCtrl"
This element element allows up to 8 source or summing bus Ember+ parameter values to be triggered by a local
control signal such as an MF Key. For example, to change a series of parameters for a single source, or the
same parameter (e.g. fader level) across a range of sources.
Global Parameters
Internal SrcCtrl
Reference name for the element.
Trigger
Assigns an input control signal to trigger the parameter values.
Param x
Assign each source or summing bus you wish to adjust.
Param Path & Value
Enter the parameter path and value. The values are set when the Trigger signal is true.
Use an Ember+ Internal Src Query to report back the status of a parameter path.