LAWO POWER CORE - Configuring Power Core

Power Core User ManualVersion: 6.6.0/352/539
8. Configuring Power Core
8. Configuring Power Core
This chapter describes how to configure Power Core. You should be familiar with the ON-AIR Designer
configuration tool. If not, please refer to the separate "ON-AIR Designer User Guide".
Topics include:
· Starting a Configuration
· Creating a New Configuration
· Opening an Existing Configuration
· Checking the Network Communication
· Loading a Project from the Unit
· Selecting a Different License Package
· Enabling an Add-on License
· Monitoring the Resources
· Saving the Project
· Transferring Configuration Data to the Unit