Power Core User Manual Version: 6.6.0/3 55/539
8. Configuring Power Core
3. Once you have specified the 'Frame' , click on Finish.
The software creates the new project and a number of windows will open. In our example, we can see the
'Project' window (on the left), plus the 'System Core' (in the central working area):
It may take a few seconds to build the new project. During this time the status is shown in the "progress" bar
(below Console in the 'Project' window).
The next logical step is to define the properties in the 'Project' window.
To Next Page