5.2011.8583.0 C
5-32 Operating Instructions
Figure 50. Page Fences
KEY: 1. Button add a task - 2. Button to view the manually
set tasks - 3. Scan information of the fence
2. Push the button Fences.
3. Push the button Add a task (1).
Figure 51. Add manual tasks page
KEY: 1. Drop down list to select route - 2. Selected fence -
3. Button to add a feed task for selected fences
4. Select the route or combined routes in the drop
down list (1).
5. Select one or more fences, when a fence is
selected a check mark appears
(2).
6. Push the button Add feed task (3).
All tasks are shown in the order of execution.
The tasks start when the Mixing and Feeding Robot is in operation and connected to the charger under
the feed loading point, the PDB (Feed Controller) is in operation and the feed kitchen is in operation.
When all the tasks are done, the system will continue to work automatically.
If you want to delete a manual task in the list, push the button
at the end of a line.
in n o vato rs in agriculture
To Next Page
Loading...
