5.2011.8583.0 C
6-10 Maintenance Procedures
Examine
Figure 59. Examine the mixer knives
1. Use the stepladder and carefully look into the mixing bin and examine the knives, do not climb into the
mixing bin.
2. The knives must not be broken or worn and they must be sharp.
3. The big knives (new knives are 8 mm thick) must be at least 4 mm thick at the location of the arrow in
the figure (see figure 59 on page 6-10).
4. If necessary replace the mixer knives (see Install or Replace Mixer Knives on page 6-10).
Close-up
1. Switch on the Mixing and Feeding Robot with the key (see Switch on the Mixing and Feeding Robot
with the Key on page 5-14).
6.2.7 Install or Replace Mixer Knives
There are two sizes of mixer knives in use, the optimal number of small and big knives
depends on the feed types. Ask Lely FMS for advise about the knives.
Always use stainless steel bolts M16 x 45 for big knives and M12 x 35 for small knives and
anti seize paste.
in n o vato rs in agriculture
To Next Page
Loading...
