LELY Vector - Console and Signal Lights; Power Distribution Box

5.2011.8583.0 C
Description 4-7
4.2.4 Console and Signal Lights
Figure 28. Console and signal lights
KEY: 1. Signal lights - 2. Start button - 3. Emergency button
The start button (2) on the signal console is used to put the feed kitchen in operation. In the paragraphs
about the safety devices you can find more information about the emergency stop button and the signal
lights (see Emergency Stop Button on Console on page 2-22).
4.2.5 Power Distribution Box
The power distribution box is a large control box in the feed kitchen. It distributes power to:
• Charger(s).
• Bridge Crane and Feed Grabber (optional).
• Control box Additives dispenser (frequency pulse) (optional).
• Control box External concentrates (frequency weight) (optional).
• Safety fence (optional).
The power distribution box is connected to the T4C PC or the farms network connected to the T4C PC.
The power distribution box can give an on/off signal to a digital output (Optional) to start/stop a (tower)
silo or conveyor belt.
On the PCB in the power distribution box runs the Feed Controller software.
in n o vato rs in agriculture