5.2011.8583.0 C
Safety 2-5
• Visually inspect the Vector stepladder annually if it is still suitable for proper use. If not, replace the
stepladder.
• Do NOT spout water on the body of the Feed Grabber. Use a wet brush to clean the Feed Grabber
2.3 Safety decals
2.3.1 Safety Decals on the Mixing and Feeding Robot
Figure 3. Location of the safety decals
Key
Decal Explanation
1
Caution: Read manual
Failure to follow operation instructions could result in death or serious injury.
Read the manual.
2
Caution: Electrocution hazard
Risk of electrocution.
Switch off the power before doing maintenance, adjustment or repair.
3
Warning: Magnetic fields
Do not work near the magnets if you have a cardiac pacemaker or other implant
that can be impaired by magnetic fields.
4
Danger: Rotating parts
Danger of being entangled by rotating parts.
Keep hands, loose clothing and long hair away from moving parts during
operation of the Mixing and Feeding Robot
in n o vato rs in agriculture
To Next Page
Loading...
