LELY Vector - Switch off the Main Switch on the Mixing and Feeding Robot Near the Battery

5.2011.8583.0 C
5-12 Operating Instructions
Figure 42. Switch on or off the mixing and feeding robot with the key
KEY: 1. Pause button - 2. Safety key - 3. Emergency stop button
5.1.6.4 Switch off the Main Switch on the Mixing and Feeding Robot near the Battery
If you have some experience with the main switch, you can set the switch to Off without
first removing the skirt piece.
1. Push the pause button (2) (see figure 41 on page 5-11) to make sure the Mixing and Feeding Robot
does not drive.
2. Rotate the skirt until the skirt piece is on the back of the Mixing and Feeding Robot.
3. Remove the bolts (1) (see figure 43 on page 5-13) and the skirt piece (2).
4. Turn the main switch (3) to the OFF position.
5. Install the skirt piece (2) with the bolts (1).
in n o vato rs in agriculture