5.2011.8583.0 C
2-2 Safety
2.2 Safety Instructions
YOU are responsible for the SAFE operation and maintenance of your Vector system. YOU must make sure
that you and anyone else who is going to operate, maintain or work in the vicinity of the devices know all
the related SAFETY information in this manual.
YOU are the key to safety. Good safety practices protect you and the people around you. Make these
practices a working part of your safety program. Make sure that EVERYONE who operates, maintains or
works near the devices obeys the safety precautions. Do not risk injury or death by ignoring good safety
practices.
• Owners must train operators before they operate the Vector system. This training must be repeated at
least annually.
• The operator must read, understand and obey all safety and operating instructions in the manual.
• A person who has not read and understood all safety and operating instructions is not permitted to
operate the Vector system.
• Do not modify the equipment in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment and persons.
• Only use approved spare parts and make sure that they are only installed by authorized technicians.
The hazards in the danger zone and working area pose a risk of fatal injury to
unauthorized persons.
Unauthorized persons who do not satisfy the requirements described herein are not
aware of the hazards in the work area. Unauthorized persons are therefore at risk of
serious or fatal injury.
• Keep unauthorized persons away from the danger zone and work area.
• If in doubt, approach unauthorized persons and ask them to leave the danger zone
and work area.
• Stop work as long as unauthorized persons are within the danger zone and work
area.
2.2.1 General Safety
• Read and understand this manual and all safety signs before you operate, maintain or adjust any parts
of the Vector system.
• Only trained persons are permitted to operate the Vector system or parts of the Vector system.
• The operator is only allowed to do maintenance tasks on the Vector system that are described in this
manual. Only a Lely trained technician is allowed to do maintenance tasks on the Vector system that
are not described in this manual.
• Review safety related items with all operators frequently (annually).
• Keep unauthorized persons, especially small children away from the feeding system at all times.
• Keep hands, feet, hair and clothing away from all moving parts.
• Make sure all covers are installed before you operate the Vector.
in n o vato rs in agriculture
To Next Page
Loading...
