LELY Vector - Put the Feed Grabber in Operation

5.2011.8583.0 C
5-6 Operating Instructions
Figure 38. Status screen
KEY: 1. Switch to put the PDB with the feed controller
software in or out of operation
3. Click on the switch (1), the colour of the switch
changes from green to grey.
Take the Feed Controller out of Operation with the Smartphone
1. Connect the smartphone (see Connect the Smartphone to Device Software on page 5-15) to the Feed
Controller.
2. Go to the page Work.
The page displays the current status (On).
3. Push
.
The Feed Controller is switched to Off.
Put the Feed Controller In Operation with the WebUI
1. Start the WebUI (see page 5-16).
2. Push the button
Status.
3. Click on the switch (1) (see figure 38 on page 5-6), the colour of the switch changes from grey to
green.
Put the Feed Controller in Operation with the Smartphone
1. Connect the smartphone (see Connect the Smartphone to Device Software on page 5-15) to the Feed
Controller.
2. Go to the page Work.
The page displays the current status (Off).
3. Push
.
The Feed Controller is switched to On.
5.1.5.2 Put the Feed Grabber In Operation
1. Connect the smartphone (see Connect the Smartphone to Device Software on page 5-15) to the Feed
Grabber.
in n o vato rs in agriculture