5.2011.8583.0 C
4-12 Description
Additives Dispenser with Stir Motor (frequency pulse)
Figure 33. Dispenser with Stir Motor
KEY: 1. Drop pipe - 2. Dispenser silo - 3. Auger motor - 4. Stir motor - 5. Sensor pulse counter
• A control box with two or more frequency regulators is installed in the feed kitchen. One frequency
regulator for the auger motor and one for the stir motor.
• The frequency regulator regulates the number of pulses of the motor of the additives dispenser.
• The dispenser doses per pulse, in the software this is called FreqCon Pulse.
4.2.9 External Concentrates (frequency weight)
A control box with one or more frequency regulators (one for each concentrate) regulates the on/off
signal for distribution of the concentrate. This signal switches to Off when the Mixing and Feeding Robot
has measured the set weight. The runtime is protected by a maximum runtime, this is the expected
runtime plus 30%.
The Mixing and Feeding Robot weighs the concentrates during loading. In the software this is called
FreqCon Weight.
in n o vato rs in agriculture