LELY Vector - Safety Decals of the Tower Silo; Safety Decals on the Route

5.2011.8583.0 C
2-10 Safety
2.3.6 Safety Decals of the Tower Silo
Location
Decal Explanation
Near the power switch on
every tower silo or other
device operated with
Digital Output
Lock instructions tower silo
This decal warns the mechanic on
the tower silo or other device that it
is operated with Digital Output. The
mechanic is warned about the fact
that the Vector system starts the
auger or conveyor belt of the silo.
The decal instructs the mechanic to
switch the power to the silo off and
to lock the switch before doing
maintenance.
2.3.7 Safety Decals on the Route
Location
Decal Explanation
At the entrance of a
narrow alley on the route
of the Mixing and Feeding
Robot
Caution: Narrow alley zone
Risk of being trapped.
In this zone the clearance around
the Mixing and Feeding Robot is less
than 50 cm (19.7 in). It is not
possible for persons to pass the
Mixing and Feeding Robot in this
area. When the Mixing and Feeding
Robot deploys a sound and light
signal, move to the nearest exit
away from the Mixing and Feeding
Robot. The Mixing and Feeding
Robot will wait a time period to
allow evacuation before continuing
the route.
in n o vato rs in agriculture