5.2011.8583.0 C
Maintenance Procedures 6-9
Sharp knives.
Risk of severe injury.
When you enter the mixing bin always wear cut resistant clothes to protect your hands
arms and legs. You must wear at least gloves, sleeves and trousers, all with a cut
resistance according to the standards mentioned in the paragraph 'Cut resistant
clothing' (see Cut Resistant Clothing on page 2-4). Preferably also wear a jacket or an
overall according to the standards.
Use the Vector stepladder to do this procedure.
Preparation
1. Examine the feed at the feed fence and see if it is mixed and cut as well as when the knives where new.
If the ration is the same and the mixing time is the same, bad mixed and cut feed could indicate that
the knives are dull or worn.
2. Examine the alarms, alarms and notifications that the mixer is blocked are also an indication that the
knives are dull or worn.
3. Switch off the Mixing and Feeding Robot with the key and remove the key (see Switch off the Mixing
and Feeding Robot with the Key (MFR 2) on page 5-10).
in n o vato rs in agriculture
To Next Page
Loading...
