5.2011.8583.0 C
Maintenance Procedures 6-11
Sharp rotating knives.
Risk of severe injury or death.
Remove the key before you do work in the mixing bin.
Sharp knives.
Risk of severe injury.
When you enter the mixing bin always wear cut resistant clothes to protect your hands
arms and legs. You must wear at least gloves, sleeves and trousers, all with a cut
resistance according to the standards mentioned in the paragraph 'Cut resistant
clothing' (see Cut Resistant Clothing on page 2-4). Preferably also wear a jacket or an
overall according to the standards.
Sharp knives.
Risk of severe injury.
Before you enter the mixing bin you must install the knife guards on the knives located
at the top of the mixer. When you have climbed in the mixing bin you must first install
the knife guards on the other knives.
Preparation
1. Switch off the Mixing and Feeding Robot with the key and remove the key (see Switch off the Mixing
and Feeding Robot with the Key (MFR 2) on page 5-10).
2. Make sure you know the position of the knives.
Mixer with 3 big knives, 4 small
knives
Mixer with 2 big knives, 3 small
knives
Short feed mixer (more knives
can be installed)
in n o vato rs in agriculture
To Next Page
Loading...
