5.2011.8583.0 C
5-28 Operating Instructions
2. Use the smartphone
Change the preferred storage place with the WebUI
1. Start the WebUI (see page 5-16).
2. Push the button
Kitchen.
Figure 48. Kitchen page
KEY: 1. Feed loading point - 2. Fill button, marks selected blocks as filled - 3. Prefer button, marks a selected block as a preferred
block - 4. Fill all button, marks all storage places as filled - 5. Green border indicates the block is not empty - 6. Grey border
indicates the block is empty - 7. Button to start the fill mode - 8. Icon indicates the preferred block of that feed type - 9. Icon
indicates a selected block
3. Click on the feed storage place.
When a block is selected a check mark appears
.
4. Push the button Prefer (3).
A grabber icon
(8) appears in the bottom right corner of the block.
Per feed type only one feed storage place can be the preferred one.
in n o vato rs in agriculture
To Next Page
Loading...
